3M™ MDT Tubing offers increased flexibility in combination with excellent abrasion, corrosion and environmental resistance properties and meets MIL-DTL-23053/15, Class 2. Uncoated product (without sealant) is available on special order. 3M MDT medium-duty tubing is designed to provide reliable performance as well as excellent mechanical and environmental protection, These flame-retardant products combine the important advantages of easy handling and instillation with maximum operating reliability and system protection. MDT comes with a factory-applied sealant. This sealant is a heat-activated thermoplastic material that remains soften and flexible over long periods under adverse environmental conditions. During heating the ...
3M™ HDT tubing is designed 10 provide reliable performance as well as excellent mechanical and environmental protection. This flame-retardant product combines the important advantage of easy handling and invitation with maximum operating reliability and system protection. HDT Tubing comes with a factory-applied sealant. This sealant is a heat-activated thermoplastic material that remains soft and flexible over long periods under adverse environmental conditions. During heating the sealant softens, bonds to underlying surfaces and fills small voids that might be present. When cool, the sealant forms a barrier against water, moisture, dirt and other environmental contaminants. Heavy-duty tubing is fabricated from specially ...
SUMITUBE B2 is a very flexible, flame-retarded, radiation-crosslinked heat shrinkable polyolefin tubing which meets all of the material and functional requirements of Military Specification AMS-DTL- 23053/5, Class 1 and Class 3.
Shrink temperature is 90°C.
Operating temperature range is -55°C to +135°C and up to 200°C for short time durations.
B2 is recommended for use in general purpose applications such as wire marking, color coding, and electrical insulation of light wire harness assemblies. For higher expansion ratio versions see B2(3X), B2(4X), and B2(4XC) data sheets.
SUMITUBE K is a translucent semi-rigid, inherently flame retarded, heat-shrinkable PVDF tubing, that is recognized by Underwriters' Laboratories (UL) Subject 224 with a VW-1 rating and meets or exceeds the requirements of AMS-DTL-23053/8C.
SUMITUBE K is tough and abrasion resistant in mechanical environments. It has excellent properties for cut-through and solvent resistance.
Shrink temperature is 170° C.
Operating temperature range is -55° C to +175° C.
SUMITUBE K is recommended for applications for strain relieving components such as soldered connections and splices which are in high continuous operating temperature environments. The material is good for applications where abrasion resistance is ...
The FLEXO PET (PT) grade is used in electronics, automotive, marine and industrial wire harnessing applications where cost efficiency and durability are critical.
The unique braided construction and wide expandability allows quick and easy installation over large connectors and long runs.
PT can be found in applications ranging from small office/home office to high tech wire and cable harnesses. The wide range of available colors and sizes allows easy and systematic color coding in complex wiring and cabling schemes.
PT is braided from 10 mil polyethylene terepthalate (PET) monofilament yarns. The material has a wide operating temperature range, is resistant to ...
SUMITUBE R10 is a rubber-like, flame retarded chlorinated polyolefin heat-shrinkable tubing which meets or exceeds all the requirements of Military Specifications AMS-DTL-23053/1C Classes 1 and 2.
Shrink temperature is 130° C.
Operating temperature range is -75° C to +120° C and up to 200° C for short durations.
SUMITUBE R10 is recommended for general purpose applications which require excellent abrasion and chemical resistance, such as diesel fuel environments. R10 has excellent properties at low temperatures.
SUMITUBE W3B2 is a flexible, flame-retarded heat-shrinkable polyolefin tubing, with a thick wall modified polyamide adhesive which melts and flows, encapsulating and sealing components contained within.
SUMITUBE W3B2 complies with the requirements of AMS-DTL-23053/4, Class 3, in the sizes marked below.
Shrink temperature is 110° C.
Operating temperature range is -55° C to +125° C.
SUMITUBE W3B2 is recommended for applications requiring water-proofing for light cable and wire harnesses and protection of connector components.
For similar tubing with UL / CSA surface printing.
SumiMark® III is a high performance, high speed thermal transfer marking system designed to print on continuous spools of a wide variety of SumiMark® tubing materials and sizes (Tubing diameters from 1/16" to 2"). The SumiMark® III produces a dry, permanent mark that can be handled as soon as it is printed. After recovery, our printing meets the demanding mark permanence requirements of SAEAS81531 for both abrasion and solvent resistance.
The 300 dpi print head produces crisp, high quality text, barcodes and graphic images. The capability to print on continuous spools of a large range of tubing materials such as polyolefin, fluoropolymer, and dual wall adhesive lined, allows the end user the ability to ...
(AMC) Aerospace Materials Corporation | 1940
Petra Lane, Suite D, Placentia, CA 92670 | Toll
Free: 800.596.7396 | Phone: